Survey
Project request
Print

Stainless steel our passion & competence

Stainless steel our passion & competence

Blasting

Inexpensive Stainless steel grit blasting is used for smaller components (Welded constructions) made of Stainless steel up to 1.2 m in length. The weld seams are also perfectly freed from scale and tarnish afterwards.

Large-area components are blasted with glass beads due to the lower mechanical impact on the sheet surfaces (less distortion). This process makes the surface more matt than Stainless steel grit blasting.
The glass bead blasting process used by us works very cleanly (without the risk of blasting material contamination) and changes the sheet metal surface only very slightly.

Photo railing glass bead blasted
Performance data
  • Compressed air and wheel blasting
  • Part sizes max. height 2,500 mm, width 3,000 mm and length up to 8,000 mm
  • Unit weights up to approx. 2 tons
Service
  • we can blast small parts of a few centimetres up to large components of several metres.
  • by masking with foil, also as lettering or logo, we can apply signs to the surface with glass bead blasting. The film is then peeled off and the shiny or smoother writing is clearly visible in the inscribed areas.
  • we blast your parts as pure wage labour or deliver them with material as a finished construction.

Product areas and categories for fastening technology and industrial componants