HORIZONTAL CONNECTION
Products
Windposts
MOSO® windpost fixings
Windposts are profile constructions as a base for holding the facing shell, when fixing to the supporting foundation is only possible laterally on the ground floor level.
Frequently, the infill panel (wall elements between the concrete pillars and concrete surfaces) of the reinforced concrete framework
is made of lightweight material, in which no load-bearing fixing can be mounted. These are usually mounted with wall distance profiles on the ceiling, so that the vertical mounting channels, consisting of a rectangular tube or U-profiles can be arranged in front of the thermal insulation in the cavity. The brick tie anchors are attatched to this.
The brick tie anchors can be mounted continuously in a C-profile channel, so that the bricklayer can insert the anchor end exactly in the right horizontal joint during the laying of the facing shell.
ADVANTAGES
Your advantages:
- A very flexible solution for bridging areas which cannot be fixed
- A sufficiently large height adjustment of the brick tie anchors ensures trouble-free insertion when laying the higher facing shell walls
- When Modersohn takes care of the planning, our Z-30.3-19 officially approved resistance class III high-strength lean duplex steels can be used. This allows a significant reduction of the profile cross-sections due to viable higher static E-modulus values (200 kN/mm² for D4 steel instead of 170 kN/mm for A4 steel)
PRODUCTION INFORMATION
| Wall clearances | 105 - 370 mm (> on request) |
| Material | stainless steel, corrosion resistance class (CRC) III (further corrosion resistance classes on demand) |
| Validation | static calculation |
USE AND APPLICATION
- These profile constructions are often used for masonry support when, for example, for the use of lightweight construction walls no sustainable background is present and/or the building is exposed to strong wind loads.
- A fixing of the construction on the reinforced concrete surface ensures that larger areas are bridged vertically and loads are absorbed floor by floor. Therefore, one speaks of a kind of "bridge between the ceilings."
HV-A
Fascia facing - Horizontal connection HV-A
The MOSO® horizontal connection HV-A is the fascia restraint anchor around cracks, that can occur due to different movements of flat roofs and facing. Since the anchor is attached below the flat roof support, the movements of the flat roof have no affect on the facing.
ADVANTAGES
Your advantages:
- The MOSO® HV-A is ideal for accommodating the thermal movement of the facing shell in fascia areas.
The displacement in the C-channel to the wall connection anchors can move freely up and down - Wall clearances of more than 200 mm, due to increased thermal insulation, are possible. In addition to the MOSO® retaining anchor, we take care of separate itemisation of air space wire stays based on DIN EN 1996-2/NA
PRODUCT INFORMATION
| Lengths | 600 - 1100 mm |
| Wall clearances | 80 - 200 mm |
| Material | stainless steel, corrosion resistance class (CRC) III (further corrosion resistance classes on demand) |
| Validation | static calculation |
TENDER TEXT
... pieces MOSO® horizontal connection type HV-A8501 including dowels for cracked concrete 2 and brick tie anchors type MA-A-1203.
Alternative:
Delivery and professional installation of ... m fascia facing with MOSO® horizontal connection type HV-A for fascia heights ... m, wall clearance (insulation and air space) ... cm, facing stone thickness ... cm, including dowels for cracked concrete2 and necessary brick tie anchors
Note:
In mountings using the MIC screw, the appropriate supporting anchor channel should be tendered separately.
1 Type acc. table
2 Fixing in-situ concrete acc. table
3 Brick tie anchors acc. table
USE AND APPLICATION
HV-T
Horizontal connection with joint - HV-T
The MOSO® horizontal connection HV-T is a trapezoidal joint anchor, which makes the normally required bracing superfluous.
Thanks to the the articulated connection, different movements of the outer and inner shell are compensated.
ADVANTAGES
Your advantages:
- The MOSO® HV-T has only one elongated slot instead of 2 closely fitting sitting joints (as in other systems), which shorten with movement and thus build up tension. Thus, the threaded wire can move freely with the thermal motion of the facing shell without length reduction.
- The production of the elongated hole in the trapezoidal sheet is very accurate thanks to laser cutting, so the mandatory maximum slip of 1mm between hole edge and wire is ensured.
PRODUCT INFORMATION
| Adjustment | +/- 15 mm |
| Wall clearances | 60 - 200 mm |
| Material | stainless steel, corrosion resistance class (CRC) III (further corrosion resistance classes on demand) |
| Validation | proof of consent in individual cases, static calculation, approvals (fixing) |
TENDER TEXT
... pieces MOSO® horizontal connection type HV-A8501 including dowels for cracked concrete2 and brick tie anchors type MA-A-1203.
Alternative:
Delivery and professional installation of ... m fascia facing with MOSO® horizontal connection type HV-A for fascia heights ... m, wall clearance (insulation and air space) ... cm, facing stone thickness ... cm, including dowels for cracked concrete2 and necessary brick tie anchors
1 Type acc. table
2 Fixing in-situ concrete acc. table
3 Brick tie anchors acc. table
USE AND APPLICATION
HV-D
Wire ties for subsequent fixing -
Horizontal connection HV-D
The MOSO® horizontal connection HV-D is the wire tie for the subsequent connection of cavity walls according to
DIN EN 1996-2/NA.The anchors can be placed in various bases thanks to different versions.
ADVANTAGES
Your advantages:
- We supply the standard sizes of authorised air space wire ties quickly and inexpensively from extensive stocks
- Wall clearances of more than 200 mm, due to increased thermal insulation, are possible: in addition to the MOSO® support brackets, we take care of separate itemisation of air space wire stays based on DIN EN 1996-2/NA
- We also supply the appropriate air space wire stays at reasonable prices
PRODUCTION INFORMATION
| Diameter | 4 mm |
| Wall clearances | up to 250 mm (> on request)* |
| Material | stainless steel, corrosion resistance class (CRC) III (further corrosion resistance classes on demand) |
| Proof building | inspection authority approval or test certificate |
* Note: wire ties for wall clearances <20 cm are available on request.
TENDER TEXT
Delivery and professional installation of ... pieces MOSO® horizontal connection type HV-DAZ1 -4x2752 including insulation holders MOSO®-ISO-Clip.
Alternative:
Delivery and professional installation of ... m2 wall surface with MOSO® horizontal connection type HV-DPB1 for wall clearance (insulation and air space) ... cm, facing stone thickness ... cm including insulation holders.
1 Type acc. table
2 Dimensions acc. table
USE AND APPLICATION
HV-L
Air layer eyelet anchors for subsequent fixing - Horizontal connection HV-L
The MOSO® horizontal connection HV-L is the air layer eyelet anchor for the subsequent connection of cavity walls according to
DIN EN 1996-2/NA.The demolition of the old facing shell during restoration is not necessary since the anchoring can be done through the old shell. Likewise, these anchors can be placed in difficult anchoring bases when the sustainability is proved by tensile tests.
ADVANTAGES
Your advantages:
- Particularly suitable for façade restoration, since the wire stay with bent eyelet can be combined with the matching plugs for the frames i.e. the outer structures
- Quick and easy installation
- Particularly suitable for large wall clearances
- Also available with stronger wire for higher pressure loads
PRODUCTION INFORMATION
| Diameter | 4 mm |
| Wall clearances | up to 430 mm |
| Material | stainless steel, corrosion resistance class (CRC) III (further corrosion resistance classes on demand) |
| Proof building | inspection authority approval or tensile tests |
TENDER TEXT
Delivery and professional installation of ... pieces MOSO® horizontal connection type HV-LL-10-2351 including insulation holders MOSO®-ISO-Clip.
Alternative:
Delivery and professional installation of ... m2 wall surface with MOSO® horizontal connection type HV-L for common brickwork2 Wall construction: old insulation and air space ... cm, old facing brick thickness ... cm, new insulation and wall space ... cm, new facing brick thickness ... cm, including insulation holders.
1 Type acc. table
2 Describe the nature of the common brickwork
USE AND APPLICATION
- For restoration, in which the old facing shell should not be demolished
- Fixing for concrete, natural stone and solid brick masonry with approved frame anchors.
Proof of anchoring with tensile tests - Fixing for perforated brick, hollow blocks and little pressure-resistant solid building materials.
Proof of anchoring with tensile tests
HV-S
Special versions - Horizontal connection HV-S
The MOSO® horizontal connection HV-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.
ADVANTAGES
Your advantages:
- Our own engineering office for structural design solves your special and demanding fixing situations
- We supply assembly-optimised restraint anchors, tailored to the intended use
- On request, we produce auditable static verifications
- We also supply fixings in special materials, for example, for corrosion resistance class IV of the DIBt approval Z-30.3-6, as well as the materials 1.4462, 1.4529, 1.4539 and 1.4547
- Wall clearances of more than 200 mm, due to increased thermal insulation, are possible: In addition to the MOSO® support brackets, we take care of separate itemisation of air space wire stays based on DIN EN 1996-2/NA