ANGLE BEARING
Products
WA-Ü / WA-Z
Always ready to bear - Angle bearing WA-Ü/WA-Z
The MOSO® angle bearing WA-Ü bridges a lintel opening. Additional fixing is not necessary since the bracket only needs to be layed. The MOSO® angle bearing WA-Z is used as an intermediate angle for bracing with a single support bracket and enables variable support bracket spacing thanks to different lengths.
ADVANTAGES
Your advantages:
- Quickly available from stock in the standard profile sizes and fixed lengths
- Inexpensive and quick to assemble since no additional fixing is necessary
- No thermal bridge to the supporting masonry or concrete on the foundation
- Optical cover for the bottom view of stones of the through-course
PRODUCT INFORMATION
| Support width | 90, 95 and 100 mm |
| Opening width | up to 2.26 m |
| Material | stainless steel, corrosion resistance class (CRC) III (further corrosion resistance classes on demand) |
| Validation | static calculation |
TENDER TEXT
Delivery and professional installation of ... pieces MOSO® angle bearing type WA-Ü-100/60/4-14501.
Alternative:
Delivery and professional installation of ... pieces lintel overlap for clearance ... m with MOSO® angle bearing type WA-Ü for masonry height ... m, facing brick thickness ... cm.
1 Acc. table
USE AND APPLICATION
WA-D / WA-M
For a closed bottom view - Angle bearing WA-D/WA-M
The MOSO® angled bearing WA-M allows direct mounting to the anchorage base. With the MOSO® angle bearing WA-D large wall clearances can be bridged with the help of welded diagonal struts. Both types are used when the bracing remains visible and a closed view is desired.
ADVANTAGES
Your advantages:
- Solid angle design which, if desired, seals the air space below
- The large cantilevered angle fully covers the stone underside and air space optically
- Relatively easy to assemble and align with the help of elongated holes on the gusset plates
- We also supply the compatible approved air space wire stay at a low-cost
PRODUCT INFORMATION
| Load grades | 1.2 - 3.2 kN |
| Wall clearance | 10 - 200 mm |
| Material | stainless steel, corrosion resistance class (CRC) III (further corrosion resistance classes on demand) |
| Validation | static calculation |
TENDER TEXT
Delivery and professional installation of ... pieces MOSO® angle support bracket WA-D-2101 -3,22 -10003 including dowels for cracked concrete4.
Alternative:
Delivery and professional installation of ... m bracing with MOSO® angle support bracket type WA-D for masonry height
... m, wall clearance (insulation and air space) ... cm, facing stone thickness ... cm, including dowels for cracked concrete4.
1 Protruding length acc. table
2 Protruding length acc. table
3 Element length
4 Fixing acc. table
USE AND APPLICATION
WA-S
Special versions - Angle bearing WA-S
MOSO® angled bracket WA-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.
ADVANTAGES
Your advantages:
- Our own engineering office for structural design solves your special and demanding fixing situations
- Even small series or one-off productions present no problems
- With us you get optimised assembly instructions to match the application components
- On request, we produce auditable static verifications
- We also supply fixings in special materials, e.g. for corrosion resistance class IV of dDIBt approval Z-30.3-6, such as
the materials 1.4462, 1.4529, 1.4539, 1.4547 - Wall clearances of more than 200 mm, due to increased thermal insulation, are possible. In addition to the MOSO® support brackets, we take care of separate itemisation of air space wire stays based on DIN EN 1996-2/NA
- We also supply the appropriate air space wire stays at reasonable prices
PRODUCT INFORMATION
| Material | stainless steel, corrosion resistance class (CRC) III (further corrosion resistance classes on demand) |
| Validation | static calculation |