MOSO® ANCHOR CHANNELS
The solution for concrete fixings
Officially approved in Europe, anchor channel MBA-CE is used to mount installation parts in in-situ concrete or as a cast-in part in the precast part.
The MBA-CE anchor channel offers a horizontal or a vertical adjustment option depending on the mounting situation. MOSO® hammerhead/hook-head bolts MHK are used as fasteners.
We offer a complete range of anchor channels made of the stainless steels 1.4462 D4 (duplex steel) and more recently, from 1.4062 (lean duplex steel):
an approved universal system (Z-21.4-1826) for cost and installation-optimised concrete fixings.
The permissible loads can be calculated with the company one's calculation software MOSOCONstructor.
You will find the current version, available for your download, under the category "Service/Downloads".
Please refer to the table for the dimensions.
We are at your disposal for additional information on European approvals.
PRODUCTION INFORMATION
| Lengths/span | up to 6000 mm |
| Profile sizes (K = shorter KB-distance) | 28/15; 38/17; 38/17K; 40/25; 50/31; 52/34 |
| Materials | Stainless steel Corrosion resistance class (CRC) III/IV |
ADVANTAGES
- MOSO® MBA channels are manufactured from, among others, lean duplex steel 1.4362 which was introduced by us and is technically superior to the A4/A5 steels. Better corrosion resistance, twice the yield strength Rp0.2, higher rigidity of about 18%, higher sustained temperature resistance, higher fatigue strength, and much more.
- By welding the shear connectors it is possible, according to DIBT approval, to use the shear connector of a lower corrosion resistance class and therefore provide more cost-effective solutions. Due to the lack of shear connector coverage (as they are pressed into the punched-through channels), other anchor channel systems require the use of the same material as the C-channel.
- Inexpensive stainless steel hammerhead and hookhead bolts are readily available from us. Please contact us with your specific needs!